​CHOOSING THE RIGHT LED DRIVER:
All LED OUTDOOR lights require a LED driver to operate. Drivers are simply connected to a standard power point (240V) and then your extra low voltage (12 or 24V) lights can be safely connected to the driver. Cables to the low voltage lights can be soldered, crimped or connected using mounting blocks. To ensure water resistance LED OUTDOOR recommends soldering and then sealing  the connections with a quality heat shrink tubing with built in glue. 

Once you have chosen which lights you are after, you will need to add up the wattage required. ie. If you after 4 spike lights and they are 5w each,  then you will require at least a 20w driver. It is always recommended to get a driver with a larger capacity than what is required. This will allow the driver to run cooler and more efficiently and give you the flexibility of adding more lights in the future. As a rough rule we recommend getting a driver that is at lease 20-30% bigger than the operating wattage. 

If you require any assistance in choosing the right driver please use the contact form or phone 08 8278 5269.